Slant/Fin Gas Boilers Installed By Novel Care

Slant/Fin gas boilers are economical and clean running boilers that provide a great way to generate heat for your home in the winter. Slant/Fin gas boilers can significantly reduce your monthly heating bills as they are incredibly energy efficient, which means by replacing your old low-efficiency boiler you will reduce your environmental footprint.

slantfin gas boilers

Sentry Gas Boilers – SlantFin Gas Boilers

Fuel: Gas
System: Hot Water
Combustion: Natural Draft
Capacity: 34-150 MBH Input
Efficiency: to 84.78%

The Most Advanced Natural Draft Gas Boiler

Sentry is ideal for a wide variety of gas boiler requirements, as a replacement or for new installations. Its advanced design provides years of trouble-free, high-efficiency operation while providing easy installation, even in sites with low chimney connections or low overhead clearance.

  • Input: Models 34,000 to 150,000 Btu/Hr
  • Intermittent ignition
  • Saves energy. AFUE to 84.4%
  • Models with integral draft hood fit sites with clearance as low as 38-1/2″s

Low Profile Makes Problem Installations Easy

The Sentry Boiler fits into replacement sites with low chimney breeching or low overhead clearance. Sentry models have an integral draft diverter and does not require a separate draft hood. Chimney vent connections heights begin at 38-1/2″, nearly a foot and a half lower than typical natural draft boilers.

Sentry’s low profile permits installation in sites with low chimney breeching or low overhead clearance.

Sentinel SE Series Gas Boilers – SlantFin Gas Boilers

Fuel: Gas
System: Hot Water
Combustion: Natural Draft, atmospheric
Capacity: 70 – 210 MBH Input
Efficiency: to 84%

North America’s best value in replacement gas hot water boilers

  • Input: 70,000 to 210,000 Btu/hr
  • Intermittent ignition
  • Efficiency to 84% AFUE

High-performance cast-iron heat exchanger

The Sentinel boiler’s S-Series heat exchanger has for years been a “workhorse” of the heating industry, in boilers chosen by heating contractors for performance and reliability. It’s made of quality cast-iron and assembled with durable metal push nipples.

Specially shaped thermal pins promote efficient heat transfer. The boiler heats quickly, sending warmth to radiators throughout your home within moments of your thermostat’s call for heat. The Sentinel boiler is so reliable it comes with a lifetime limited warranty

Intermittent ignition

Enjoy the easy installation and reliable operation that natural draft design provides, plus high efficiency too. With intermittent pilot ignition, Sentinel’s AFUE’s range to 84%.

Metal push nipples avoid leaks

Metal Push Nipples Avoid LeaksSlant/Fin uses only metal push nipples that expand and contract with the individual boiler sections that they connect. In many ordinary boilers, flimsy rubber or plastic gaskets are substituted for metal push nipples and are subject to deterioration and leaks.

slantfin gas boilers

Galaxy GG Series Gas Boilers – SlantFin Gas Boilers

Fuel: Gas-Fired
System: Hot Water
Combustion: Natural Draft, atmospheric
Capacity: 75 – 399 MBH Input
Efficiency: to 84.78%

Efficiency and reliability you can count on

Slant/Fin’s Galaxy is one of North America’s most trusted gas boilers. Installed in tens of thousands of homes, Galaxy is the choice of experienced heating professionals everywhere. For homeowners, it’s the wise choice for long-term efficiency and reliability.

  • Input: 75,000 to 399,000 Btu/hr
  • 14 capacities for residential to light commercial requirements
  • Extended jacket conceals controls, wires and gas valve
  • Intermittent pilot
  • One of North America’s most popular gas boilers

Galaxy GG Series – for hot water heating systems

Galaxy GG Series boilers are designed specifically for hot water heating systems. For other requirements, including tankless coils for domestic water, steam heating systems and low profile steam models, refer to the Galaxy GX-GXH-GXHA Series boilers. Altogether, there are 85 Galaxy boiler models in a variety of sizes and configurations to meet most heating requirements.

Fuel saving performance with traditional cast-iron boiler design

We’ve fine-tuned natural draft cast-iron boiler technology to its most advanced state. With AFUE ratings to 84.78%, Galaxy keeps fuel costs low. It doesn’t rely on complex technologies for its efficiency, so there’s less to pay for now and less to go wrong. While other boilers become subject to performance and breakdown problems over the years, you can count on Galaxy for efficient, trouble-free performance.

Built for superb performance and long life.

The computer-aided design of Galaxy’s heat exchanger maximizes the transfer of heat from the flame to the water in your heating system.

The flue passage design, thermal pin pattern and consistent wall thickness of each casting ensure uniform heat transfer and reduced thermal strain which prolongs the life of the castings. Durable metal push nipples expand and contract with the individual boiler sections that they connect. No flimsy gaskets that may deteriorate and leak.

Galaxy GX Series Gas Boilers – SlantFin Gas Boilers

Fuel: Gas
System: Hot Water or Steam
Combustion: Natural Draft, atmospheric
Capacity: 105 – 300 MBH Input
Efficiency: to 81.3%

Efficiency and reliability you can count on

Slant/Fin’s Galaxy is one of North America’s most trusted gas boilers. Installed in tens of thousands of homes, Galaxy is the choice of experienced heating professionals everywhere. For homeowners, it’s the wise choice for long-term efficiency and reliability.

  • Input: 105,000 to 300,000 Btu/hr
  • Hot water and steam models
  • Tankless heater optional
  • Extended jacket conceals controls, wires and gas valve
  • Intermittent pilot
  • One of North America’s most popular gas boilers

Galaxy GX-GXH-GXHA Series – for a wide range of heating applications

Galaxy GX-GXH-GXHA Series boilers are made in a variety of configurations to meet a wide range of heating requirements. GX and GXH water models include tankless coils for domestic water. GXH and GXHA steam boilers are available with or without tankless heaters.

Low profile GXHA steam models fit in locations with reduced overhead clearance. For models designed specifically for hot water heating systems, refer to Galaxy GG Series models. Altogether, there are 85 Galaxy boiler models in a variety of sizes and configurations to meet heating requirements.

Galaxy Steam models

Galaxy steam models are the industry’s best solution to system noise and boiler maintenance problems. High-efficiency models, with an intermittent pilot and vent damper, are also among the most efficient steam boilers you can buy.

The Galaxy produces dry steam and delivers it to the system through a 2 1/2″ supply tapping. This ensures lower steam velocity and quieter system operation. The speed skimmer trough built into Galaxy “PZ” steam boilers, makes cleaning the boiler water easy by skimming of surface films of grease, oil and other contaminant’s.

Victory VSPH Series Gas Boilers – SlantFin Gas Boilers

Fuel: Gas
System: Hot Water
Combustion: Sealed Combustion
Capacity: 60 – 180 MBH Input
Efficiency: to 86.1%

For Value And Reliability, Victory VSPH Is Your Smart Choice In Sealed Combustion Boilers

The quality built Victory VSPH boiler provides everything you want in a sealed combustion boiler – chimney-less installation with electronically controlled efficiency, comfort, and safety. Yet it is a reliable cast-iron boiler with a lifetime limited warranty. And economically priced, too!

  • Input: 60,000 to 180,000 Btu/hr
  • Energy Star rated. AFUE to 86.1%
  • No chimney required
  • Economically priced

Installation versatility – no chimney required

Save construction costs and allow more living space with a Victory VSPH sealed combustion boiler. A chimney is not required, so it can be installed in a closet-size space and vented directly through a wall with 3″ stainless steel piping. It’s ideal for homes, apartments, condos and any application where a chimney may not be practical or where an old chimney has deteriorated.

Sealed combustion makes your home more comfortable

Your home will be more comfortable with a Victory VSPH boiler because it does not use household air for combustion. It draws combustion air directly from the outdoors. There are no open flame and no vent system components that permit exhaust or flame to “back up” into the house. Unlike the VSPH, ordinary boilers consume warm household air for combustion, which causes chilly infiltration drafts, disrupting the comfort of your living area.

Fuel: Gas System: Hot Water Capacity: 60 - 180 MBH Input Efficiency: to 84.5% For Value And Reliability, Victory VHS Is Your Smart Choice The quality built Victory VHS boiler provides everything you want in a sealed combustion boiler – chimney-less installation, economical price, comfort and safety. It is a reliable cast-iron boiler with a lifetime limited warranty. Input: 60,000 to 180,000 Btu/hr No chimney required Economically priced Installation versatility - no chimney required Save construction costs and allow more living space with a Victory VHS sealed combustion boiler. A chimney is not required, so it can be installed in in a closet size space and vented directly through a wall with 3" stainless steel piping. It’s ideal for homes, apartments, condos and any application where a chimney may not be practical or where an old chimney has deteriorated. Flexibility In Venting Chimney or "Type B" venting - with galvanized or stainless steel pipe. Natural draft venting for VHS 90 through VHS 180 boilers. (see manual) Contractor Friendly Features Speed Installation and Reduce Service Time Horizontal flue outlet with 3-inch connector for better performance. Condensate drain is built into the flue discharge assembly. Drain tube for condensate is factory installed. Junction box for power connection. Pressure switch is the same for all boiler sizes and all altitudes. Intermittent pilot "spark" ignition saves energy.

Victory VHS Series Gas Boilers – SlantFin Gas Boilers

Fuel: Gas
System: Hot Water
Capacity: 60 – 180 MBH Input
Efficiency: to 84.5%

For Value And Reliability, Victory VHS Is Your Smart Choice

The quality built Victory VHS boiler provides everything you want in a sealed combustion boiler – chimney-less installation, economical price, comfort, and safety. It is a reliable cast-iron boiler with a lifetime limited warranty.

  • Input: 60,000 to 180,000 Btu/hr
  • No chimney required
  • Economically priced

Installation versatility – no chimney required

Save construction costs and allow more living space with a Victory VHS sealed combustion boiler. A chimney is not required, so it can be installed in a closet-size space and vented directly through a wall with 3″ stainless steel piping. It’s ideal for homes, apartments, condos and any application where a chimney may not be practical or where an old chimney has deteriorated.

Flexibility In Venting

Chimney or “Type B” venting – with galvanized or stainless steel pipe. Natural draft venting for VHS 90 through VHS 180 boilers. (see manual)

Contractor Friendly Features Speed Installation and Reduce Service Time

  • Horizontal flue outlet with 3-inch connector for better performance.
  • The condensate drain is built into the flue discharge assembly.
  • Drain tube for condensate is factory installed.
  • Junction box for power connection.
  • The pressure switch is the same for all boiler sizes and all altitudes.
  • Intermittent pilot “spark” ignition saves energy.
slantfin gas boilers

Jaguar High-Performance Condensing Gas Boiler – SlantFin Gas Boilers

Fuel: Gas-Fired
System: Hot Water
Capacity: to 390,000 BTUH
Efficiency: to 96.7%

Jaguar – For large applications – The new generation modulating, condensing gas boiler is here!

  • Better performance. Longer life.
  • Up to 96.7% efficiency
  • Cast aluminum Mono Block heat exchanger
  • 3.5:1 Modulation
  • 110,000 to 390,000 Btuh input
  • Floor standing
  • Natural gas
  • Quiet operation
  • Environmentally friendly—Low NOx
  • Built-in digital control board with outdoor reset

Compact, powerful and agile. Slant/Fin’s new Jaguar sealed combustion gas boiler purrs with performance. Operates at up to 96.7% efficiency maximizing fuel savings. Compact, lightweight for easy handling.

Advanced design aluminum heat exchanger sets a new standard for reliability. You will be proud to offer the Jaguar to your customers looking for high efficiency, advanced technology, long lasting boiler.

Intake and exhaust pipe up to 100 feet of equivalent length pipe can be used, allows you to install boiler almost anywhere. Quick seal vent pipe connections ensure an easy positive seal. Venting is 76 mm (3″) nominal I.D. plastic venting certified to the standard for type BH gas venting systems ULC S636 or stainless steel.

This new generation design incorporates a cast aluminum heat exchanger that is
corrosion resistant. Its high thermal conductivity heats boiler water quickly.

slantfin gas boilers

High-Efficiency Lynx – SlantFin Gas Boilers

Fuel: Gas-Fired
System: Hot Water
Combustion: Modulating, Sealed Combustion
Capacity: 3 sizes, 25-150 MBH Input
Efficiency: up to AFUE 95%

Lynx Modulating Condensing Gas Boiler

The new generation modulating, condensing gas boiler is here! Lynx

Modulating Condensing Gas boiler is compact, powerful and agile. Slant/Fin’s new Lynx sealed combustion gas boiler purrs with performance. Operates at 95% AFUE, maximizing fuel savings. Compact, lightweight for easy handling. Advanced design aluminum heat exchanger sets a new standard for reliability. You will be proud to offer the Lynx to your customers looking for a high efficiency, advanced technology, long lasting boiler.

  • Advanced design long life cast aluminum heat exchanger
  • All boilers ready for Floor standing or wall mount
  • Natural or L.P. gas
  • PVC/CPVC vent pipe up to 100 ft, equivalent length
  • All connections on top
  • Easy access terminal strip for wiring
  • Quiet operation
  • Low NOx – friendly to the environment
  • Ideal for radiant, baseboard, DHW or mixed applications
  • 15 Year Limited Warranty with 5-year parts and labor warranty

Lynx- Combi – SlantFin Gas Boilers

Fuel: Gas-Fired
System: Hot Water
Combustion: Modulating, Sealed Combustion
Capacity: 2 sizes, 30–150 MBH Input
Efficiency: up to AFUE 95%

Lynx-Combi

The newest generation of Lynx boiler features the combi-boiler that provides heat and domestic hot water neatly packaged in one cabinet! The Lynx Modulating Condensing Gas Boiler is compact, powerful and agile.

The amount of hot water that is produced is largely dependent on the BTUH output of the boiler, the desired flow rate and the temperature on the incoming cold water. You will be proud to offer the Lynx to your customers looking for a high efficiency, advanced technology, long lasting boiler.

  • Advanced design long life cast aluminum heat exchanger
  • 4:1 modulation
  • All boilers ready for Floor standing or wall mount
  • Natural or L-P. gas
  • PVC/CPVC vent pipe up to 100 ft. equivalent length
  • All connections on top
  • Easy access terminal strip for wiring
  • Quiet operation
  • Low NOx – friendly to the environment
  • Ideal for radiant, baseboard, DHW or mixed applications
  • Brazed plate heat exchanger mounted neatly in boiler cabinet
  • 15 Year Limited Warranty with 5-year. parts and labor warranty

VSL-II – SlantFin Gas Boilers

Fuel: Gas-Fired
System: Hot Water
Combustion: Modulating, Sealed Combustion
Capacity: 4 sizes, 90-250 MBH Input
Efficiency: up to AFUE 92%

VSL-II Modulating Condensing Gas Boiler

The Stant/Fin VSL-II Condensing gas boiler stands at the top in performance, safety, and environmental ratings. The boiler is equipped with a stainless steel alloy fiber mesh burner and is available for natural or propane gas.

The ASME Stainless steel heat exchanger has unparalleled resistance to corrosion. A proven European Design packaged and designed for an American Company to serve American people is sure to satisfy your requirements.

  • 92% AFUE
  • Available as heating only
  • Set as NG and field convertible to LP with no extra kit requirements
  • Modulation Ratio up to 5:1
  • Unparalleled Resistance to corrosion
  • Intuitive Control System
  • Outdoor Reset
  • Direct Vent/sealed Combustion
  • Venting options are Separate or concentric piping systems
  • ASME Stainless Steel Heat Exchanger
  • Low Pressure Drop through Heat Exchanger
  • Low Lead CSA Approval to meet toughest VT & CA Legislation
  • Cascade up to 8 Boilers
  • DHW Prioritization
  • Automatic Control and Diagnostics
  • AHRI Certified
  • 5 Year Parts and Labor Warranty, plus 15 Year Limited Warranty, when registered upon installation

Get A Free Quote!

0 + 3 = ?